Product category

Share to:

API600 150LB cast steel A216 WCB welding globe valve

l Size: 1/2''-56''(DN15~DN1400)
l Pressure Rating: 150LB-2500LB/PN16~PN100/10K~60K)
l Material: A351 CF8M/CF8/CF3/CF3M, A216 WCB, A352 LCB/LCC,F51/F53/F304/F304L/F316/C95800
l Connection pattern:BW,BSP,SW
l Suitable Temperature: -196ºC~450ºC( Different temperature choose different materials).
l Suitable Medium: Water, Steam, Oil and natural gas etc.
Availability:
Quantity:
  • J-VALVES

API600 150LB cast steel A216 WCB welding globe valve

 

 

       J-VALVES API600 150LB cast steel A216 WCB welding globe valve belong to mandatory, so the valve is closed, must be pressure on the disc, to force a sealing surface does not leak when medium by disc below into the valve 6, operating force required to overcome resistance, is stem and packing of the friction force and thrust produced by medium pressure, close the valve force stronger than open the valve, so it's bigger, the diameter of the stem or stem top bending failure happensIn recent years, from the valve seal, flange globe valve is replaced by the disc above the medium flow direction into the valve cavity, in the medium pressure at this moment, close the valve of the force is small, and the strength of the valve, the valve stem diameter can be correspondingly reduced at the same time, in the role of media, this kind of valve is hermetically sealed and STL surfacing disc can increase the service life of the wear resistant and corrosion products longer can install the hand wheel, bevel gear, pneumatic, electric, hydraulic actuator, and so on

 

       J-VALVES API600 150LB cast steel A216 WCB welding globe valve are designed, constructed, and tested according to DIN Standards. Other international standards including API, ASME ,ANSI, JIS and  BS are also available upon request.

 

 

 

1.API600 150LB cast steel A216 WCB welding globe valve Technical specifications:

 

 

l Bolted Body, Full Port Construction

 

l Standard Compliance: BS1873,ASME B16.34

 

l Pressure-Temp. Rating: ASME B16.34

 

l Face to Face: ASME B16.10 

 

l End Flange: ASME B16.5,ASME B16.47

 

l Butt Welding Ends: ASME B16.25

 

l Inspection and Test: API600,API 598

 

 

 

2.API600 150LB cast steel A216 WCB welding globe valve Product Specification:

 

l Size: 1/2''-56''(DN15~DN1400)

 

l Pressure Rating: 150LB-2500LB/PN16~PN100/10K~60K)

 

l Material: A351 CF8M/CF8/CF3/CF3M, A216 WCB, A352 LCB/LCC,F51/F53/F304/F304L/F316/C95800

 

 

l Connection pattern:BW,BSP,SW

 

l Suitable Temperature: -196ºC~450ºC( Different temperature choose different materials).

 

l Suitable Medium: Water, Steam, Oil and natural gas etc.

 

 

 

3.API600 150LB cast steel A216 WCB welding globe valve  Product Feature:

 

l The structure of the API globe valve  body includes straight-through, direct-flow and right-angle.

 

l The medium flow direction of the shut-off valve has two kinds of "low inlet, high outlet" and "high inlet and low outlet". Only the medium is allowed to flow in one direction, and the installation has directionality.

 

l When the shut-off valve is opened, when the opening height of the valve flap reaches 25% to 30% of the nominal diameter of the shut-off valve, the flow has reached the maximum, which means that the shut-off valve has reached the fully open position.

 

 

l The structure of the globe valve is simpler than that of the gate valve, and it is more convenient to manufacture and maintain.

 

l The sealing surface is not easy to wear and scratch, and the sealing performance is good. There is no relative sliding between the valve disc and the sealing surface of the valve body when opening and closing, so the wear and scratches are not serious, the sealing performance is good, and the service life is long.

 

l WCB+13Cr,WCB+STL ,304,316 seat seal( Seat seal material could be decided by customer's request or according to valve's medium & temp. condition).

 

l Operation: Hand wheel, Worm wheel, Pneumatic actuator & Electric Actuator.

 

 

 

4.API600 150LB cast steel A216 WCB welding globe valve Product Drawing:

 

 

 

Note: All the data should be confirmed with the approved drawings of manufacturer.

 

 

 

Tips:

 

     We also manufacture other type valves, as butterfly valve, check valve, globe valve, Y strainer, sanitary butterfly valve, sanitary ball and so on.

 

     Any item meets your interest, anything confused you, pls keep me posted, let's talk more.

 

 

 

J-VALVES Service:

 

l On Samples Buyer bear the air fee, but this fee will be reduced from order directly

 

l On After Sales Free replacement if there is any quality problem

 

l On Delivery Never delay delivery time

 

l On Materials Ensure material pure

 

l Ensure material pure

 

 


Home

Products: API600 Gate Valve,Cast Steel Globe Valve,Swing Check Valve,Industrial Valve
All rights reserved ZHEJIANG J-VALVES FLUID EQUIPMENT CO., LTD